Polaris Timbersled ST 93 RIPPER 2019, Owner'S Manual

Page: 64 / 84

2. Place the Ski Rubber
w
on top of the center of the ski
q
with the indicated
“Front” of the Ski Rubber towards the front tip of the Ski.
3. Place the lower portion of the Spindle
e
on top of the Ski Rubber
w
in the
ski saddle to where the Fork Clamp support bracket would be positioned
behind the front forks of the bike. Line up the bottom bolt hole and insert the
M 10 x 155 mm bolt
r
.
Apply nut
t
to bolt and torque to specification listed below.
TORQUE
45 Nm (33 Ft. Lbs)
62
INSTALLATION