Polaris 2008 Outlaw 50 Owner'S Manual Download Page 115

Page: 115 / 199

112

Maintenance

Periodic Maintenance Chart

Maintenance Chart Key

Perform these operations more often under severe use, such as in dirty or wet condi-

tions, to purge water or dirt contamination from grease fittings and other critical components.

Emission-related service (Failure to conduct this maintenance will not void the emis-

sions warranty but may affect emissions.)

Dealer service item.

WARNING

Improperly performing the procedures marked with a

could result in component failure and lead to

serious injury or death. Have an authorized Polaris dealer perform these services.

Summary of Contents for 2008 Outlaw 50








































































































































































































Search results

Summary of Contents for 2008 Outlaw 50

Reviews:

Related manuals for 2008 Outlaw 50

Brands by name

Popular brands

Polaris 2008 Outlaw 50, Owner'S Manual

Search results

Summary of Contents for 2008 Outlaw 50

Reviews:

Related manuals for 2008 Outlaw 50

Brands by name

Popular brands