Polaris 2008 Outlaw 50 Owner'S Manual Download Page 65

Page: 65 / 199

Driver Warnings

WARNING

POTENTIAL HAZARD

Overloading the ATV.

WHAT CAN HAPPEN

Overloading the ATV could cause changes in

handling, which could lead to an accident.

HOW TO AVOID THE HAZARD

Never exceed the stated load capacity for this

ATV.
If equipped with racks, cargo should be prop-

erly distributed and securely attached.

WARNING

POTENTIAL HAZARD

Operating the ATV with improper modifica-

tions.

WHAT CAN HAPPEN

Improper installation of accessories or modifi-

cation of the ATV may cause changes in han-

dling which could lead to an accident.

HOW TO AVOID THE HAZARD

Never modify the ATV through improper

installation or use of accessories. All parts

and accessories added to the vehicle must be

genuine Polaris Industries Inc. or equivalent

components designed for use on this ATV and

should be installed and used according to

approved instructions.

Summary of Contents for 2008 Outlaw 50








































































































































































































Search results

Summary of Contents for 2008 Outlaw 50

Reviews:

Related manuals for 2008 Outlaw 50

Brands by name

Popular brands

Polaris 2008 Outlaw 50, Owner'S Manual

Search results

Summary of Contents for 2008 Outlaw 50

Reviews:

Related manuals for 2008 Outlaw 50

Brands by name

Popular brands