Polaris 2008 Outlaw 50 Owner'S Manual Download Page 124

Page: 124 / 199

121

Maintenance

Engine Oil Check

Maintain the oil level within the safe range on

the dipstick. Do not overfill.
1. Position the vehicle on a level surface.
2. Remove the dipstick. Wipe it dry with a

clean cloth.

3. Reinstall the dipstick completely.
4. Remove the dipstick and check the oil level.

NOTE:

A rising oil level between checks in cool

weather driving can indicate contaminants

such as gas or moisture collecting in the

crankcase. If the oil level is over the full/safe

mark, change the oil immediately.

5. Add the recommended oil as needed.
6. Reinstall the dipstick.

Dipstick

Full

Add Oil

{

Safe Range

Summary of Contents for 2008 Outlaw 50








































































































































































































Search results

Summary of Contents for 2008 Outlaw 50

Reviews:

Related manuals for 2008 Outlaw 50

Brands by name

Popular brands

Polaris 2008 Outlaw 50, Owner'S Manual

Search results

Summary of Contents for 2008 Outlaw 50

Reviews:

Related manuals for 2008 Outlaw 50

Brands by name

Popular brands