Polaris 2008 Outlaw 50 Owner'S Manual Download Page 52

Page: 52 / 199

Driver Warnings

WARNING

POTENTIAL HAZARD

Operating this ATV at excessive speeds.

WHAT CAN HAPPEN

Increases your chances of losing control of

the ATV, which can result in an accident.

HOW TO AVOID THE HAZARD

Always travel at a speed which is proper for

the terrain, visibility and operating conditions;

and your experience.

WARNING

POTENTIAL HAZARD

Failure to inspect the ATV before operating.

Failure to properly maintain the ATV.

WHAT CAN HAPPEN

Increases the possibility of an accident or

equipment damage.

HOW TO AVOID THE HAZARD

Always inspect your ATV each time you use it

to make sure the ATV is in safe operating con-

dition. Always follow the inspection and main-

tenance procedures and schedules described

in the Owner's Manual.

Summary of Contents for 2008 Outlaw 50








































































































































































































Search results

Summary of Contents for 2008 Outlaw 50

Reviews:

Related manuals for 2008 Outlaw 50

Brands by name

Popular brands

Polaris 2008 Outlaw 50, Owner'S Manual

Search results

Summary of Contents for 2008 Outlaw 50

Reviews:

Related manuals for 2008 Outlaw 50

Brands by name

Popular brands