Polaris 2008 Outlaw 50 Owner'S Manual Download Page 149

Page: 149 / 199

146

Maintenance

Toe Alignment

Use the following procedure to check the toe alignment of the vehicle. The recommended toe

alignment is 1/8" to 1/4" (3-6 mm) toe out.
1. Set the handlebars in a straight-ahead position.

NOTE:

The steering frog can be used as an indicator of whether the handlebars are straight. The frog

should always point straight back from the steering post.

2. Place stands in front of the vehicle, perpendicular to the rear tires.

WARNING

Severe injury or death can result from improper toe alignment and adjustment. Do not attempt to

adjust tie rod alignment. All tie rod adjustments should be performed by an authorized Polaris

dealer.

Summary of Contents for 2008 Outlaw 50








































































































































































































Search results

Summary of Contents for 2008 Outlaw 50

Reviews:

Related manuals for 2008 Outlaw 50

Brands by name

Popular brands

Polaris 2008 Outlaw 50, Owner'S Manual

Search results

Summary of Contents for 2008 Outlaw 50

Reviews:

Related manuals for 2008 Outlaw 50

Brands by name

Popular brands