Polaris 2008 Outlaw 50 Owner'S Manual Download Page 30

Page: 30 / 199

Pre-Ride Check

If you used the storage area under the seat, make sure the seat is locked in place.

Have an adult check the engine oil level when the engine is cold. The engine is very hot

after it has been running and it can burn your skin if you touch it. Children must never

check the oil on their own. An adult should always be in charge of keeping the gas and

oil levels at the full marks.

This last check is done with the engine running. You must check to make sure that all

three ways to stop the engine of your ATV are working the way they should. Do you

remember what they are? If you can't remember the three ways to stop the engine, go

back to page 24 and review. Then have an adult help you start the engine. Practice stop-

ping the engine all three ways.

Summary of Contents for 2008 Outlaw 50








































































































































































































Search results

Summary of Contents for 2008 Outlaw 50

Reviews:

Related manuals for 2008 Outlaw 50

Brands by name

Popular brands

Polaris 2008 Outlaw 50, Owner'S Manual

Search results

Summary of Contents for 2008 Outlaw 50

Reviews:

Related manuals for 2008 Outlaw 50

Brands by name

Popular brands