Polaris 2008 Outlaw 50 Owner'S Manual Download Page 18

Page: 18 / 199

Safety

Equipment Modifications

We are concerned for the safety of our customers and for the general public. Therefore, we

strongly recommend that consumers do not install on a Polaris ATV any equipment that may

increase the speed or power of the vehicle, or make any other modifications to the vehicle for

these purposes. Any modifications to the original equipment of the vehicle create a substan-

tial safety hazard and increase the risk of bodily injury.
The warranty on your Polaris ATV is terminated if any equipment has been added to the

vehicle, or if any modifications have been made to the vehicle, that increase its speed or

power.

NOTE:

The addition of certain accessories may change the handling characteristics of the ATV. Use

only Polaris-approved accessories, and familiarize yourself with their function and effect on

the ATV.

Summary of Contents for 2008 Outlaw 50








































































































































































































Search results

Summary of Contents for 2008 Outlaw 50

Reviews:

Related manuals for 2008 Outlaw 50

Brands by name

Popular brands

Polaris 2008 Outlaw 50, Owner'S Manual

Search results

Summary of Contents for 2008 Outlaw 50

Reviews:

Related manuals for 2008 Outlaw 50

Brands by name

Popular brands