Polaris 2008 Outlaw 50 Owner'S Manual Download Page 71

Page: 71 / 199

Features and Controls

Throttle Controls

WARNING

Operating an ATV with sticking or improperly operating throttle controls could cause an accident and

lead to severe injury or death.
Never start or operate an ATV with a sticking or improperly operating throttle. Always contact your

dealer for service if throttle problems arise.
Failure to check or maintain proper operation of the throttle system can result in an accident if the

throttle lever sticks during operation. Always check the lever for free movement and return before

starting the engine. Also check occasionally during operation.

Summary of Contents for 2008 Outlaw 50








































































































































































































Search results

Summary of Contents for 2008 Outlaw 50

Reviews:

Related manuals for 2008 Outlaw 50

Brands by name

Popular brands

Polaris 2008 Outlaw 50, Owner'S Manual

Search results

Summary of Contents for 2008 Outlaw 50

Reviews:

Related manuals for 2008 Outlaw 50

Brands by name

Popular brands