12
II. Optional Equipment Setup
Monark Bike
If a Monark 828E was purchased wit h your TriFIT 620 system, you will receive
a Bike interface cable. This cable plugs into the TriFIT 620 unit where it is
labeled
bike
and plugs into the connector on the front cover of the Monark 828
Bike. Refer to the Instruction manual that came with the Mona rk 828 for setup
instructions. To calibrate the bike and setup defaults for the TriFIT, see the next
sections.
620 Blood Pressure
If a Blood Pressure option was purchased, you will receive 3 cuffs; a Small,
Standard and X-Large.
To install the blood pressure
connector into the TriFIT 620 unit,
firmly snap in the white or black
plastic connector as shown here.
You will need to set some defaults in
the TriFIT software to work with the
Blood Pressure unit in the next
section.
Bike interface
plug on the
Monark 828
Bike interface
Plug on TriFIT
620
