11
Step 5
Now you are ready to plug the testing devices into the TriFIT 620 unit. They
each have unique connectors, so you cannot plug the wrong device into the
wrong connector.
Step 6 –Platform Setup
•
Screw in the eyebolt on the scale strap assembly into the
top of the platform. Make sure it is tightened all the
way.
•
Attach the “C” connector on the strength strap assembly to the strength
handle. Make sure it is tightened all the way.
•
Check the strap for any wear or defects before each use,
as this could cause injury to the client being tested on the
Biceps Strength Test.
Skyndex or
Lange
calipers go
here
Range of
Motion Unit
goes here
Load
Platform/Scale
goes here
Bike or Heart
Rate Cable
for Treadmill
goes here