(374) TRAKANBAU 9800-GB
GB
ATTACHING TO TRACTOR
- 5 -
Attaching implement to tractor
Safety hints:
see supplement-A1 points 7.), 8a. - 8h.)
Centre-mount (M) mower unit
to tractor
-
Adjust lower link accordingly.
Frame in horizontal position
-
Bring frame into horizontal
position by
a d j u s t i n g
linkage arm
spindle (15).
Setting lower link height (48 cm)
-
Adjust tractor's hydraulics (ST) using bottom stop.
This height allows optimal evenness when working on
uneven ground and need not be changed for swinging
cutter bar up.
Hydraulic connection
-
see next page.
Connect hydraulic lines
• Then close both valves (b)
-
Turn control knob (P) to the right until it stops.
TD 79/98/01
15
TD25/90/8
16
48
cm
TD 79/98/19
Setting upper link height using spindle
-
By turning upper link spindle (16) the cutting height is
adjusted .
A hydraulic upper link is
recommended.
(double-action hydraulic connection)
Fitting drive shaft
-
Before operating for the first time, drive shaft is to be
checked and adapted if necessary. See alse chapter
"Drive Shaft" in supplement B.
