- 20 -
1) optional equipment
(374) 9800-GB WARTUNG
MAINTENANCE
GB
8
h
FETT
TD45/94/24b
GW
GW
0,8 Liter
SAE 90
1,2 Liter
SAE 90
1,5 Liter
SAE 90 EP
General maintenance hints
In order to keep the implement in good condition after long
periods of operation, please observe the following points:
Safety points
•
Turn engine off when adjustment, service and repair
work is to be done.
•
Do not work under the machine without safe support.
-
Retighten all screws after the first hours of operation.
-
Tighten all screws after the first hours of operation.
Check blade screws in particular.
-
Observe maintenance hints for angular gear and cutter
bar.
Spare parts
a. The
original
components and
accessories
have
been designed
especially for these
machines and
appliances.
b. We want to make it
quite clear that
components and accesories that have not been supplied
by us have not been tested by us.
c. The installation and/or use of such products can,
therefore, negatively change or influence the construction
characteristics of the appliance. We are not liable for
damages caused by the use of components and
accessories that have not been supplied by us.
d. Alterations and the use of auxiliary parts that are not
permitted by the manufacturer render all liability invalid.
Asbestos
-
Certain sub-supplied components of
the vehicle may contain asbestos
due to technical reasons. Observe
the warning on spare parts.
Drive shaft
-
Lubricate drive shaft every 8 hours of operation.
-
Pull sliding sections apart and grease well.
Cardan shafts
-
Lubricate both shafts (GW) every 20 hours of operation.
-
Pull sliding sections apart and grease well.
Gear
-
Change oil after the first 50 operating hours.
Under normal operating conditions, oil is to be replenished annually.
-
Change oil after 900 ha at the latest.
