GB
MAINTENANCE AND SERVICE
- 24 -
0000-GB KLINGEN-SCHNELLW (354)
Changing the Cutter Blades
1. Insert lever (H) horizontally between cutter disc and
holder (30)
2. Push movable holder (30) down using lever (H).
3. Remove cutter blade (M)
4. Clean forage remains and dirt away.
- around the bolts (30) and inside the lining (32)
5. Check:
•
blade bolts (31) for damage, wear and fitting
•
holder (30) for damage, change in position and fitting
•
lining (32) for damage.
-
Side surfaces must not show signs of deformation (33)
6. Fit cutter blades and remove lever (H)
7. Check:
•
cutter blades (31) for correct position (visual check)
-
Gap (0 mm).
The top surface of the bolt must lie free of play.
-
Side gap (B)
. Bolts must not touch the lining.
•
that cutter blade (M) can move freely on bolt.
TD 23-97-8
31
30
TD 23-97-7
H
M
30
Visual check
0 mm
B
B
33
32
TD 23/97/12
31
