GB
Repair Instructions
R-33
9700-GB REP. HINWEISE (354)
W
F
TD 23-97-5a
M
L
Repairs on the cutter bar
Install flange (F)
Use suitable tools (W)!
Important Point!
When screwing the nut on, do not push the flange
(F) onto the drive shaft profile - the thread on the
drive shaft could become damaged.
Only screw the nut (M) on when there is sufficient thread
length (L) in order to prevent any damage.
•
Secure nut (M) against loosening.
-
with „Loctite 242“ or an equivalent product.
F
TD 23-97-5
70 Nm
(7 kpm)
