Section 2. Installing Your PlexWriter
16
PlexWriter 8/2/20 Operation Manual
Factory Jumper Settings
Figure 5 shows the factory settings of the jumpers. The functions shown are ON if
the jumpers are installed and OFF if the jumpers are removed.
Figure 5: Factory Settings for Jumpers at the Rear of the Internal Drive
Changing Jumper Settings
To remove a jumper, pull it off with your fingers or a pair of needle-nose pliers.
CAUTION
: Ensure power to the drive is OFF before installing or removing jumpers.
To add a jumper, push it onto the jumper pins. In addition to the three jumpers
already installed at the factory, extra jumpers are supplied with the PlexWriter drive.
Figure 6: Install Jumpers Across Vertical Pairs of Pins
