PlexBio IntelliPlex IW100 User Manual Download Page 59

Page: 59 / 59

IntelliPlex

1000



Code User Manual - Jan-20

Notice to User

The use of this instrumentation and its associated software is covered by one or more pending

US and foreign patents owned by PlexBio Co., Ltd. The purchase of this instrument and software

includes nontransferable rights to use the instrument and software to practice the methods

described therein. No general patent or other license of any kind other than this specific right of

use from purchase is granted. For further information on purchasing licenses for other

applications can be obtained from PlexBio Co., Ltd. 6F-1, No. 351, Yangguang St., Neihu District,

Taipei City 11491, Taiwan.

Trademarks

,DeXipher

, IntelliPlex

, DigiPlex

, πCode

, PlexBio

, are trademarks

or registered trademarks of PlexBio Co., Ltd. All other product names and any registered and

unregistered trademarks mentioned are used for identification purposes only and remain the

exclusive property of their respective owners.

Copyright

Summary of Contents for IntelliPlex IW100




























































Search results

Summary of Contents for IntelliPlex IW100

Reviews:

Brands by name

Popular brands

PlexBio IntelliPlex IW100, User Manual

Search results

Summary of Contents for IntelliPlex IW100

Reviews:

Brands by name

Popular brands