8
Items for STEP 3:
(2) Climbing Bar Assemblies
(2) Triangle Brackets
(8) #8 x 1
¹⁄₄
" deck screws
(10)
³₈
" x 2" hex bolts
(10)
³₈
" lock nuts
Turn Climbing Bar Assembly over.
Lay bracket flat on the board. Slide bracket until the stops on the underside
are tight against the boards as in previous step.
Use the bracket as a drill guide and drill four
¹₈
" holes 1" deep into the
boards. Attach with #8 x 1
¹⁄₄
" deck screws.
(Fig. 1)
Use the bracket as a drill guide and drill five
³₈
" holes completely through
the board. Attach with
³₈
" x 2" hex bolts and
³₈
" lock nuts.
(Fig. 2)
Repeat for second Climbing Bar Assembly.
(Figs. 3 & 4)
Right Assembly
Left Assembly
Fig. 1
Fig. 2
Fig. 3
Fig. 4
LT 6456 Climbing Bar Instructions_AS Instructions '04 R1 2/24/10 3:04 PM Page 8
