©2007 PLAYNATION PLAYSYSTEMS INC.
STEP 17: PICNIC TABLE
6: REPEAT THESE STEPS FOR THE OPPOSITE SIDE OF THE PLAYSET
1: PLACE THE 2 X 4 X 15" PICNIC TABLE SUPPORT ON TOP OF THE 2 X 4 X 30" PICNIC TABLE VERTICAL SUPPORT AND
POSITION THE BOARDS AT A RIGHT ANGLE.
2: ENSURE THAT THE PICNIC TABLE SUPPORT AND THE PICNIC TABLE VERTICAL SUPPORT ARE SQARE AND FASTEN
THE PICNIC TABLE SUPPORT TO THE VERTICAL SUPPORT WITH THREE 2" WOOD SCREWS IN THE PATTERN SHOWN
BELOW.
3: FASTEN THE ASSEMBLY CREATED FROM THE PREVIOUS TWO STEPS TO THE CORNER POST. POSITION THE
ASSEMBLY SO THAT THE PICNIC TABLE SUPPORT IS ON THE OUTSIDE OF THE CORNER POST, AND THE VERTICAL
SUPPORT IS ON THE INSIDE OF THE 2 X 6. FASTEN THE ASSEMBLY TO THE UNIT WITH THREE 2" WOOD SCREWS IN THE
PICNIC TABLE SUPPORT, AND TWO 2" WOOD SCREWS IN THE 2 X 6 AT THE BOTTOM. (SEE PATTERN BELOW)
4: MEASURE 18” FROM THE GROUND UP AND MARK THIS POINT ON THE CORNERPOST.
5: ATTACH THE SEAT SUPPORT TO THE OUTSIDE OF THE CORNER POST SO THAT THE TOP IS AT 18” FROM THE
GROUND. ATTACH IT WITH THREE 2” WOOD SCREWS IN EACH END
BENCH SUPPORT
SUPPORT
PICNIC TABLE
2 X 4 X 23"
2 X 4 X 30"
PICNIC TABLE
VERTICAL SUPPORT
2 X 4 X 15"
PICNIC TABLE
COMPLETE THIS STEP
FIRST. (SEE SUB-STEPS 1
AND 2)
2 X 4 X 30"
PICNIC TABLE
VERTICAL SUPPORT
2 X 4 X 15"
PICNIC TABLE
SUPPORT
