STEP 3: ASSEMBLING THE LEFT SIDE FRAME
1: LAY THE 2 X 6 X 47-1/2" SANDBOX BOARD ON TOP OF THE LEFT SIDE CORNER POSTS AT THE BOTTOM OF THE
CORNER POSTS. THE OFFSET HOLES IN THE SANDBOX BOARD MUST FACE DOWNWARD.
2: USE 5/16 X 4-1/2" HEX BOLTS AND 5/16" WASHERS TO ATTACH THE TOP HOLES OF THE SANDBOX BOARD TO THE
T-NUTS INSTALLED ON THE CORNER POSTS. THE BOTTOM HOLES WILL BE USED LATER.
3: LAY THE 2 X 6 X 47-1/2" BOTTOM PANEL BOARD ON TOP OF THE LEFT SIDE CORNER POSTS IN THE MIDDLE OF THE
CORNER POSTS. THE OFFSET HOLES IN THE BOTTOM PANEL BOARD MUST FACE DOWNWARD.
4: USE 5/16 X 4-1/2" HEX BOLTS AND 5/16" WASHERS TO ATTACH THE BOTTOM HOLES OF THE BOTTOM PANEL
BOARD TO THE T-NUTS INSTALLED ON THE CORNER POSTS. THE TOP HOLES WILL BE USED LATER.
5: LAY THE 4 X 4 X 47-1/2" SWING BEAM SUPPORT ON TOP OF THE LEFT SIDE CORNER POSTS. THE THREE COUNTER-
SUNK HOLES IN THE MIDDLE OF THE SWING BEAM SUPPORT MUST FACE DOWNWARD.
6: ATTACH THE SWING BEAM SUPPORT AS SHOWN IN DETAIL A.
4 X 4 X 47-1/2"
BOTTOM PANEL BOARD
2 X 6 X 47-1/2"
2 X 6 X 47-1/2"
SANDBOX BOARD
HEX BOLT
5/16 WASHER
FORT
OF
SWING BEAM SUPPORT
5/16 X 4-1/2"
FRONT
A
BOLT
DETAIL A
3/8" WASHER
1/2" WASHER
3/8" NUT
6-1/2" CARRIAGE
BOLT CAP
©2007 PLAYNATION PLAYSYSTEMS INC.
