STEP 26-A: THATCH ROOF HARDWARE
1: STARTING FROM THE BOTTOM, PLACE THE THATCH ROOF CLAMPS ON THE ROOF SLATS APPROXIMATELY 4" FROM
BOTH SIDES OF THE UPPER THATCH SUPPORTS, AND ATTACH WITH 3/4" PAN HEAD SCREWS. MAKE SURE THAT THE
OPEN END OF THE ROOF CLAMPS ARE FACING TOWARDS THE TOP OF THE ROOF BEFORE ATTACHING.
2: EVENLY SPACE TWO MORE THATCH ROOF CLAMPS BETWEEN THE PREVIOUSLY INSTALLED ROOF CLAMPS, AND
FASTEN WITH 3/4" PAN-HEAD SCREWS.
3: PLACE THE 47-1/2" THATCH ROOF PANEL ROD INSIDE THE OPENING OF THE THATCH ROOF CLAMPS.
4: CONTINUE WORKING UP THE ROOF, FOLLOWING THE PREVIOUS THREE STEPS, THEN REPEAT THIS PROCESS ON THE
OTHER SIDE OF THE ROOF..
©2007 PLAYNATION PLAYSYSTEMS INC.
OR RODS ON THIS SLAT ON
PANEL ROD
EITHER SIDE OF THE ROOF.
THATCH ROOF
DO NOT INSTALL CLAMPS
APPROX. 4"
THATCH ROOF
PANEL CLAMP