STEP 5: ROOF SUPPORT
1: PLACE THE 2 X 4 X 35.15 ROOF SUPPORTS ON A FLAT SURFACE AS SHOWN. THE
COUNTERBORES SHOULD BE FACING THE GROUND (FLAT SURFACE).
2: USE A CARPENTER'S SQUARE TO ENSURE THE PARTS ARE SQUARE TO ONE ANOTHER.
3: PLACE THE 5/4 X 6 X 10" ROOF PEAK SUPPORT ON TOP OF THE ROOF SUPPORTS. THE
EDGES OF THE ROOF PEAK SUPPORT SHOULD BE EVEN OR SLIGHTLY BELOW THE EDGES OF
THE ROOF SUPPORTS.
4: ATTACH THE ROOF PEAK SUPPORT TO THE ROOF SUPPORTS WITH #8 X 2" WOOD
SCREWS.
5: REPEAT SUBSTEPS 1THROUGH 4 TO MAKE ANOTHER ROOF SUPPORT ASSEMBLY.
2 X 4 X 35.15
CARPENTER'S SQUARE
ROOF SUPPORT
#8 X 2"
2 X 4 X 35.15
WOOD SCREW
RIGHT SIDE
ROOF SUPPORT
LEFT SIDE
COUNTERBORES SHOULD BE FACING THE FLAT SURFACE THE PARTS ARE RESTING ON.
5/4 X 6 X 10"
ROOF PEAK SUPPORT
(TRIANGLE)
THE TRIANGLE EDGE SHOULD BE EVEN
OR BELOW THE ROOF SUPPORT EDGE ON
BOTH SIDES.
33
