STEP 13: ROOF STARTER FRONT
IT MAY BE HELPFUL TO TEMPORARILY INSTALL A ROOF BOARD AT THE BOTTOM OF THE ROOF
SUPPORTS. THAT WAY YOU CAN MAKE SURE THE FRONT CORNER POSTS STAY PARALLEL.
1: FASTEN THE ROOF BOARD AT THE END OF THE ROOF SUPPORTS WITH #8 X 1-1/2" WOOD
SCREWS.
2: MEASURE THE DISTANCE ACROSS THE SET AT THE TOP OF THE POSTS. THAT DISTANCE
SHOULD MATCH THE BOTTOM OF THE POSTS. IF THAT DISTANCE IS NOT THE SAME THEN
LOOSEN THE SCREWS IN THE ROOF BOARD AND REPOSITION ON ONE SIDE UNTIL THE
DISTANCES MATCH.
ASSEMBLY SHOULD
(NOT LEANING IN
BE VERTICAL
OR OUT)
OR OUT)
(NOT LEANING IN
ROOF SUPPORT
BE VERTICAL
WOOD SCREWS
FRONT STARTER WILL BE INSTALLED IN THE NEXT STEP
2 PER SIDE
ROOF SUPPORT
ASSEMBLY SHOULD
#8 X 1-1/2"
1 X 5 X 76-7/8"
ROOF BOARD
70"
70"
90.00°
90.00°
41
