STEP 10: ROOF STARTER REAR
IT MAY BE HELPFUL TO TEMPORARILY INSTALL A ROOF BOARD AT THE BOTTOM OF THE ROOF SUPPORTS. THAT WAY
YOU CAN POSITION THE REAR ROOF STARTER AND MAKE ADJUSTMENTS EASILY IN STEP 11.
1: FASTEN THE ROOF BOARD AT THE END OF THE ROOF SUPPORTS WITH #8 X 1-1/2" WOOD SCREWS.
2: MEASURE THE DISTANCE ACROSS THE SET AT THE TOP OF THE POSTS. THAT DISTANCE SHOULD MATCH THE
BOTTOM OF THE POSTS. IF THAT DISTANCE IS NOT THE SAME THEN LOOSEN THE WOOD SCREWS IN THE ROOF BOARD
AND REPOSITION ON ONE SIDE UNTIL THE DISTANCES MATCH.
THE ROOF SUPPORT ASSEMBLIES SHOULD BE VERTICAL. IF THEY ARE NOT THEN YOU WILL BE ABLE TO ADJUST THEM
SOME IN THE NEXT STEP.
ROOF BOARD
2 PER SIDE
REAR STARTER WILL BE INSTALLED IN THE NEXT STEP.
#8 X 1-1/2"
1 X 5 X 76-7/8"
WOOD SCREWS
ASSEMBLY
SHOULD BE
ROOF SUPPORT
VERTICAL
(NOT LEANING
IN OR OUT)
ROOF SUPPORT
ASSEMBLY
SHOULD BE
VERTICAL
(NOT LEANING
IN OR OUT)
70"
70"
90.00°
90.00°
38
