4 7/8"
2 3/8"
STEP 38: SOLAR WALL LIGHTS
1: WITH A PENCIL MAKE A CENTER MARK ON THE OUTSIDE FACE OF THE 1 X 4 X 19.31 WALL PANEL BOARD.
MEASURE 4-7/8" HORIZONTALLY FROM THE OUTSIDE EDGE OF THE CORNER POST TOWARDS THE CENTER OF THE
WALL PANEL BOARD AND 2-3/8" FROM THE BOTTOM EDGE OF THE WALL PANEL SUPPORT TOWARDS THE CENTER
OF THE WALL PANEL BOARD AS SHOWN IN THE DIAGRAM BELOW.
2: PARTIALLY INSERT A #8 X 1" WOOD SCREW INTO THE WALL PANEL BOARD CENTER MARK FROM THE PREVIOUS
SUB-STEP. MAKE SURE THE HEAD OF THE SCREW IS STICKING OUT ABOUT 3/8" FROM THE OUTSIDE FACE OF THE WALL
PANEL BOARD.
3: MOUNT THE SOLAR WALL LIGHT ONTO THE WALL USING THE HEAD OF THE WOOD SCREW AS A HANGER INTO THE
SLOT LOCATED IN THE BACK OF THE SOLAR WALL LIGHT. THE ON/OFF SWITCH IS LOCATED IN THE BOTTOM REAR OF
THE SOLAR WALL LIGHT. YOU CAN ACCESS THIS SWITCH BY SWINGING THE SOLAR WALL LIGHT TOWARDS THE
OUTSIDE OF THE CORNER POST.
4: REPEAT SUBSTEPS 1 TO 3 FOR THE OTHER SOLAR WALL LIGHT.
1 X 4 X 19.31
SOLAR WALL LIGHT
WALL PANEL BOARD
CORNER POST
WOOD SCREW
#8 X 1"
WALL PANEL SUPPORT
ON/OFF SWITCH
SWING THE SOLAR WALL LIGHT
TOWARDS THE OUTSIDE.
66
