4) The following is the list of Bluetooth services. In this case,
scrivo.1
does not require any of the
services so you can uncheck everything and click
[Next]
to continue with the next installation.
5) Click
[Skip]
to continue when you see the following message.
6) When configuration is complete, you will see the following message. Simply click
[Finish]
.
Bluetooth Configuration
After hardware installation is complete, you need to configure the Bluetooth connection. This pro-
cess is required in Bluetooth technology different from previous version such as IR or RF techno-
logy.
1) The following is a basic Bluetooth setup process. If the
“Initial Bluetooth Configuration
Wizard”
does not appear, double click the
“My Bluetooth Places”
icon to run the basic Bluetooth
software setup process. Click
[Next]
to continue the process when the Wizard asks to add the
icon on the system.
2) Click
[Next]
after entering the computer name and type.
3) Click
[Next]
to start the wizard.
16
17
scrivo1_manual_eng_rz_kb2.qxd 06.12.2004 17:39 Uhr Seite 16
Summary of Contents for Scrivo.1
Page 1: ......
