5.2 scrivo.1 driver setting
After installation, an icon will be created in the System Tray as shown in the figure below .
scrivo.1
System Tray logo figure. Open the
scrivo.1
Control Center by
clicking
scrivo.1
Setting.
Another way to open the
scrivo.1
Control Center is to press the hot key (Defalt: F12). Simple
settings can be done here. Choose
“Advanced Configuration”
for detailed settings.
Speed
_
Mouse Mode – This setting configures acceleration in mouse mode. Acceleration can be
adjusted by moving the slider (Default: Middle)
_ Pen Mode – This setting configures acceleration in pen mode. Acceleration can be adjusted by
moving the slider (Default: 45)
5. scrivo.1 Driver and Software
5.1 Installing scrivo.1 driver and utilities
Caution: Please exit other programs before connecting scrivo.1 or installing scrivo.1 driver
and utilities
.
Setup Bluetooth communication pen and receiver before installing
scrivo.1
driver. (Use Bluetooth
Dongle CD). Insert the
scrivo.1
driver CD into your CD-ROM drive and install the driver after set-
ting up Bluetooth communication.
1) Select your language.
Installation files will be automatically loaded when the CD included is inserted into the CD-ROM
drive. Select your language to install driver and utilities.
.
2) Choosing setup type.
Select installation details and click
[Next]
to continue.
_
Install
scrivo.1 USB driver
– USB driver will be installed if selected.
_
Install
Utilities
– Finger Note
TM
will be installed if selected.
24
25
28
29
scrivo1_manual_eng_rz_kb2.qxd 06.12.2004 17:40 Uhr Seite 28
Summary of Contents for Scrivo.1
Page 1: ......
