23
VoIP Software
IAX2 Enabled
: IAX VoIP Service will be enabled if checked, IAX standard is widely used in
most IP PBX System
H.323 Enabled
: H.323 VoIP Service will be enabled if checked, H.323 standard is old fashioned
VOIP service used in early VoIP hardware
Voicemail Enabled
: Voice Mail feature will be enabled if checked
Web Interface Enabled : Allows user to login to this web interface if checked
3.
SIP Settings:
Group
: Dial plan group to be used
Host
: Allow Dynamic (any IP) host or Custom (fixed IP) host
Type
: Setup to allow Outgoing / Incoming / Both way calls
Show CallerID
: Hide Caller-ID if not checked
Call Limit
:
The concurrent call (number of simultaneous calls) limitation for this user
Call Group
:
Defines call groups for calls to this device (e.g. 1,3-5)
Pickup Group
:
Defines pickup groups from this device. (e.g. 1,3-5), calls can be picked up by dialing
Group Pickup code (e.g. *8) if this value matches the Call Group value of ringing
extension.
Qualify
: If checked, monitoring on network connection between server and user is enabled.
DTMF Mode
: The DTMF standard to be used by this extension
Automatic : Use rfc2833 for DTMF relay by default but will switch to
inband DTMF tones if the remote side does not indicate support
of rfc2833
RFC2833 : Use RFC2833 for DTMF
Inband
:The device that you press the key on will generate the DTMF
tones. If the codec is not ulaw or alaw then the DTMF tones will
be distorted by the audio compression and will not be