Platinum Curve Stairlift, Installation Manual, Page: 7 / 44

7
Safety Interlocks
The footrest and the motor unit are fitted with Safety Interlocks (7). These
are pressure pads which will stop the lift if they come into contact with any
obstructions.
If the lift stops because it has encountered an obstruction, a fault code will
be displayed on the diagnostic display. Wait two or three seconds, then
reverse away from the blockage.
Lap Belt
The Lap Belt (2) holds you safely on the seat as you climb or decend the
stairs. Like a car seat belt, this extends from the holder to clip into a socket.
The lap belt must be used every time the stairlift is used.
Do not undo the lap belt until the chair reaches the end of the track.
Charging Points
These are located at the top and bottom
of the track. The lift MUST be parked on
a charging point when not in use. The
stairlift will sound an audible beep if it is
not parked on a charging point.
Remote Controls
The Remote Controls (15) work in the
same way as the arm controls. The
standard lift is supplied with 2 remote
controls. These remote controls have 3
buttons. Up, Down and, if an intermediate
charge point is required, park.