Platinum Curve Stairlift, Installation Manual, Page: 40 / 44

40

Remove any debris including excessive, built up grease and clean all
surfaces.

Replace plastic covers ensuring they fit together correctly. Replace
metal covers ensuring the springs are in place and safety edges
operate correctly.
Re-load carriage on to rail. Re-fit end stop.
3. Carriage Body. Remove side covers.

Check all wiring and connectors to PCB.

Check all wiring and connectors to batterys.

Check battery condition. Replace if necessary.

Check battery retaining strap.

Check break release and hand-wind mechanism operates correctly.

Check wiring, connectors and switches on side cover safety edges.

Remove any debris and clean all surfaces.

Ensure footrest operates correctly.

Ensure footplate safety edges operate correctly.

Ensure footrest carpet is fixed correctly.

If powered footrest option is fitted, check all wiring, connectors and
mechanical linkages. Ensure the area is free of debris. If necessary
lubricate. Check operation.

Replace side covers ensuring they fit correctly and safety edges
operate correctly.

Ensure Diagnostic Display shows correct codes.
4. Chair. Remove center seat pad.

Check all wiring and connectors.

Ensure the 4 x M8 x 10 Hex bolts are tightened to a torque of 20 Nm..

Ensure manual swivel mechanism is free of debris and operates
correctly.

Ensure swivel interlock switch operates correctly.

If powered swivel option is fitted, remove plastic covers, check all
wiring and connectors, ensure the area is free of debris. Check
operation and replace plastic covers.

Check arm rests operate correctly.

Check seat belt operates correctly.

Check all controls operate correctly.

Repace seat pad.