Platinum Curve Stairlift, Installation Manual, Page: 41 / 44

41
Service Rail

Clean excessive grease off racking and inspect for damage/wear. If
necessary re-apply lubrication. We recommend that you lubricate
three teeth every 300mm on the rack.

Inspect rack jointing bolts and replace/re-fit if necessary.

Clean rail tubes and inspect for damage/wear.

Check combined end stops/charging ramps are fixed firmly and in the
correct position.

Inspect all sprung roll pins on rail joints and legs and replace/re-fit if
necessary.

Inspect all leg screws and replace/re-fit if necessary.

If wall brackets are fitted, inspect screws and bolts and replace/re-fit if
necessary.

Check charge circuit is operating correctly.

Check carriage stops in the correct position at the top and bottom.