Platinum Curve Stairlift, Installation Manual, Page: 5 / 44

5
Controls
Mains Power Switch
The stairlift should be plugged in at the
nearest mains socket. This could be at the
top or bottom of the stairs.
The lift needs to be plugged in and switched
on at all times. When the power is on, a
green indicator light will be shown on the
power supply, mounted nearby.
Battery Isolator Switch
The Battery Isolator Switch (9) is used to
switch the stairlift on or off.
This should be left switched on at all times
Diagnostic Display
The diagnostic display (6) displays the
current status. If any faults develop with the
operation of the lift they will be displayed
here. For a list of codes please see System
Status Codes section in this manual.
Key Switch
The Key Switch (11) is used to lock the
stairlift.
The Key Switch is located on the underside
of the armrest which contains the direction
control.
Direction Control
The Direction control (12) is located on top of
one of the armrests.
To move the chair, push and hold the switch
or joystick in the direction you want to move.
There is a three-second delay before the
stairlift will start or change direction.
Footrest
The footrest (8) folds up and down manually.
Powered footrest option.
There is an option of an automatic powered
footrest. If this option is fitted the powered
footrest can be operated by using the
powered footrest control (4). This is located
on the underside of the opposite armrest
containing the direction control