NOTE
Cleaning with compressed air is prohibited because fine dust can penetrate
the system mechanism damaging or destroying it.
NOTE
Reporting obligation of maintenance personnel!
NOTE
Maintenance personnel have a duty to immediately report and eliminate
anomalies or faults that could affect safety! This also includes checking for
possible corrosion damage or the appearance of component fatigue! The
milling unit must not be operated after such faults arise and must be
disconnected from the mains power and compressed air supply until the
faults have been remedied by qualified specialist personnel!
NOTE
The operational safety and service life of the milling unit are increased by
regular maintenance and care.
On request, replacement and wearing parts are available from the local
dealer.
10.1.1 Electrical system
WARNING
Mortal danger from electric shock!
All work on the electrical system, such as connecting the mains supply
network, maintenance and repair, must be performed by qualified specialist
personnel only. Even when the main switch is switched off, parts of the
electrical system are still live! Wait a few minutes before commencing with
maintenance!
10.1.2 Pneumatic system
WARNING
Personal injury due to a lack of diligence!
All work on the pneumatic system, such as commissioning, maintenance
and repair, must be performed by qualified specialist personnel only. The
pneumatic system must be switched off and the pressure relieved prior to
commencing work!
10.2 Replacement parts
WARNING
Risk of injury due to the use of incorrect replacement parts!
The use of incorrect or faulty replacement parts brings with it extreme
danger for personnel. This can result in damage, malfunctions or a total
failure of the milling unit.
10 Service, maintenance and cleaning
User's manual
Planmeca PlanMill 50 S 77
