background image

PLANET IP PBX user’s manual

 

 

 

 

 

 

DID of Extension 

When enabled DID, selects an extension from the list to be 

an unconditional destination for incoming calls to this trunk. 

Or click 

by number

 and then enter configurations in 

DID 

Prefix

 and 

DID Stripping

 to have the incoming calls 

directed to the corresponding extension derived by number 

manipulation. The ISDN numbers of the included ports are 

therefore regarded as the direct line of the extension. 

)

 If you set a DID extension in trunk, then only that 

extension can use this trunk to call out, and all other 

user’s call in this trunk will connect to that extension. 

DID Prefix 

A digit string to be prefixed to the incoming called number 

after stripping. 

DID Stripping 

A number of leading digits to be stripped from the original 

called number. If prefix or stripping has been given but DID 

of Extension is not 

bynumber

, the result of digit 

manipulation is dialed in a DTMF string after the call has 

been answered by the DID extension as an automatic 2

nd

 

dialing. 

Language 

Preferred language for system instructions heard from the 

trunk. 

IVR List

11

 

Associate an IVR menu with incoming calls to this trunk. 

This is mandatory unless the trunk is configured for DID.

 

Usergroup

12

 of Privilege 

When disabled DID, clicks a usergroup in the list whose 

reachability to other usergroups and trunks will use as the 

privilege of inbound calls from this trunk. 

)

 There may not be any appropriate usergroups to select 

initially. One can come back later to revise it, once the 

expected usergroups are added.

 

Caller ID 

Leaves it blank to have the default caller ID, or enters a 

caller ID that is provided by your ISDN service provider. 

 

 

 

 

 

                                                 

11

  Please refer to 0 for details. 

12

  Please refer to 4.2 for details. 

Summary of Contents for ISDN Internet Telephony PBX System IPX-1800N





































































Reviews:

Related manuals for ISDN Internet Telephony PBX System IPX-1800N