PLANET IP PBX user’s manual
2.3 On-board
WAN
Setup
The On-board WAN Setup page allows administrator to configure WAN network interface for PLANET
IP PBX. Select
System
->
On-board WAN Setup
, and the current setting of WAN network interface
is displayed, e.g. type, IP address etc. Unless the “
LAN Only”
is selected, you can choose one of the
three options,
Static IP
,
DHCP
, and
PPPoE
from the
Type
list for your configuration. Select
LAN
Only
check box to disable WAN and only default router and DNS settings are applicable.
Static IP
You can click
Static IP
in the
Type
list, and manually configure the
following information:
․
IP Address
․
Netmask
․
Default gateway IP address
․
Primary, secondary or third DNS servers
Click “
APPLY”
to submit.
DHCP
Simply click
DHCP
in the
Type
list, and click
APPLY
. The acquired
IP address, netmask, and default gateway information will show
when revisit this page later.
PPPoE
1. Click
PPPoE
in the
Type
list.
2.
Enter a user name and its password in
User Name
and
Password
boxes.
3. Click
“
APPLY”
to submit.
The PPPoE dialing will start right away. When there is an active
connection, the page will show the acquired IP address, network
mask, and default gateway information.
LAN Only
Select
LAN Only
to disable WAN IP settings but allow the
configuration of default gateway and primary/secondary/third DNS
servers.
