Planet ISDN Internet Telephony PBX System IPX-1800N User Manual Download

Page: 32 / 68

PLANET IP PBX user’s manual

Pickup Group

The usergroup that the extension can pick up. The extension can

set a usergroup that when any extension in the usergroup rings,

the extension can press *8 to pick up the call in ringing state.

Line Type

Specify the type of connection, wired or wireless, of the client with

the extension.

Language

Preferred language for system instructions heard from the

extension.

Voicemail

Select enable to allocate voicemail account for the extension.

Voicemail PIN

PIN to access voicemails. This is mandatory if above voicemail

option is enabled.

Unavailable Timeout

Timeout for ringing before a call is answered.

Allow LAN Use Only

Check to reject registration and calls from WAN in a SIP ID same

as the extension number. I.e., this extension must be on LAN.

Try Peer-to-peer RTP

If click

YES

, IP PBX will attempt to notify the two peers in a

conversation to try peer-to-peer RTP transmission. This is

suggested as long as phones support INVITE or UPDATE method

during a connected call to save the resource of IP PBX. However,

only SIP INFO DTMF mode phones should enable this since other

DTMF modes require IP PBX being RTP relay server to support in-

line transfer.

DTMF Mode

Choose preferred DTMF mode for this extension. Currently

supported types include RFC2833, SIP INFO, and in-band tone. It

must match configuration on the device side.

Advanced Settings

Select to see more optional settings shown below.

(Optional) Select

Block Anonymous Calls

to block all calls

without a Caller ID.

Selective Call Blocking

(Optional) Block one or more calling numbers by entering the

calling numbers and clicking

. Removing the blocked

numbers by clicking the number from the list, and then click

Forward Options

(Optional) Select

Unconditional Call Forward

and clicks a default

destination in the list, e.g. Voicemail or Phone Number.

)

If selecting Phone Number, enter a number to which incoming

calls are forwarded unconditionally. The number could be an

extension or a PSTN number with appropriate outbound

prefix.

Unavailable Call Forward

(Optional) Enter a number to which incoming calls are forwarded

Summary of Contents for ISDN Internet Telephony PBX System IPX-1800N





































































Search results

Summary of Contents for ISDN Internet Telephony PBX System IPX-1800N

Reviews:

Related manuals for ISDN Internet Telephony PBX System IPX-1800N

Brands by name

Popular brands

Planet ISDN Internet Telephony PBX System IPX-1800N, User Manual

Search results

Summary of Contents for ISDN Internet Telephony PBX System IPX-1800N

Reviews:

Related manuals for ISDN Internet Telephony PBX System IPX-1800N

Brands by name

Popular brands