Planet ISDN Internet Telephony PBX System IPX-1800N User Manual Download

Page: 13 / 68

PLANET IP PBX user’s manual

2.7 QoS

Setup

To assure the bandwidth reserved for the outgoing VoIP traffic over regular data traffic from LAN, the

QoS Setup page offers three parameters to characterize the WAN link. The default QoS setting is

disabled because these parameters must be correctly given according to the actual WAN speed.

Enable QoS

1. Click

Enable

2. Enter

the

WAN Uplink Speed

WAN Downlink Speed

, and

Uplink

VoIP Reserved

(bandwidth).

3. Click

APPLY

For a popular 2M/256K ADSL program, the WAN uplink speed would be

256 and the WAN downlink speed would be 2048. The Uplink VoIP

reserved could be, say, 192 out of the total 256 kbps to allow 2 concurrent

G.711 calls.

Disable QoS

Click

Disable

, and then click

APPLY

2.8 Virtual

Server

You can configure PLANET IP PBX as a virtual server for remote users to access services such as

the Web or FTP at your local site via Public IP Addresses. With proper settings, PLANET IP PBX can

automatically redirect inbound traffic from WAN to local servers configured with private IP addresses.

In other words, depending on the requested service (TCP/UDP) port number, the IP PBX redirects the

external service request to the appropriate internal server (located at one of your LAN's Private IP

Address). To enable access servers in LAN from a machine beyond WAN, select

System

Virtual

Server

to configure port mappings.

Service ID

names the service.

Protocol

and

Port

specify the

TCP/UDP port number on WAN IP to be forwarded to the

Forward to Port

Forward to IP

in LAN.

Say 192.168.1.5 is a Mail Server to be seen from outside, one should configure TCP port 25 to be

forwarded to 192.168.1.5 port 25.

Summary of Contents for ISDN Internet Telephony PBX System IPX-1800N





































































Search results

Summary of Contents for ISDN Internet Telephony PBX System IPX-1800N

Reviews:

Related manuals for ISDN Internet Telephony PBX System IPX-1800N

Brands by name

Popular brands

Planet ISDN Internet Telephony PBX System IPX-1800N, User Manual

Search results

Summary of Contents for ISDN Internet Telephony PBX System IPX-1800N

Reviews:

Related manuals for ISDN Internet Telephony PBX System IPX-1800N

Brands by name

Popular brands