Planet ISDN Internet Telephony PBX System IPX-1800N User Manual Download

Page: 39 / 68

PLANET IP PBX user’s manual

4.6

SIP Trunk Configuration

A SIP trunk refers to a SIP account on a remote call routing or gateway device. A practical example is

an account at an Internet Telephony Service Provider (ITSP) where a call is routed to a SIP client or

off-ramped to an analog subscriber via PSTN. One could also build SIP trunk to a remote IP PBX to

reach its extensions and PSTN ports.

The SIP TRUNK MANAGEMENT page allows the administrator to configure SIP trunks used by

PLANET IP PBX. Select

Trunk -> SIP Trunk

, and one can add, edit, and delete SIP trunks. Go to

Service -> IP PBX Service

, and click

RELOAD

to activate changes.

Add a SIP Trunk

1. Click

the

Add New

tab.

Enter settings shown in

Table

4.6

4. Click

ADD

to see the newly added SIP trunk in the

Trunk

Identifier

Edit a SIP Trunk

1. Click

the

Trunks

tab, and

More

to see more information.

Edit settings shown in

Table

4.6

in a row.

4. Click

APPLY

in the row to update the information.

Delete a SIP Trunk

1. Click

the

Trucks

tab, and select a trunk identifier.

2. Click

DEL

to remove the SIP trunk from the

Trunk

Identifier

Table 4.6 SIP Trunk Configuration Settings

Field

Description

Trunk Identifier

A unique number consisting of digits only. Usually give the

phone number issued by the ITSP for consistency.

Description

Arbitrary description information.

Dynamic Peer

Select if the trunk is a passive trunk which means the

Summary of Contents for ISDN Internet Telephony PBX System IPX-1800N





































































Search results

Summary of Contents for ISDN Internet Telephony PBX System IPX-1800N

Reviews:

Related manuals for ISDN Internet Telephony PBX System IPX-1800N

Brands by name

Popular brands

Planet ISDN Internet Telephony PBX System IPX-1800N, User Manual

Search results

Summary of Contents for ISDN Internet Telephony PBX System IPX-1800N

Reviews:

Related manuals for ISDN Internet Telephony PBX System IPX-1800N

Brands by name

Popular brands