manualshive.com logo in svg

Planet ISDN Internet Telephony PBX System IPX-1800N, User Manual

Share
Download
Planet ISDN Internet Telephony PBX System IPX-1800N User Manual Download Page 3

equipment in a residential area is likely to cause harmful interference in which case the user will be 

required to correct the interference at the user’s own expense. 

 

WEEE Warning 

 

To avoid the potential effects on the environment and human health as a result of the 

presence of hazardous substances in electrical and electronic equipment, end users of 

electrical and electronic equipment should understand the meaning of the crossed-out 

wheeled bin symbol. Do not dispose of WEEE as unsorted municipal waste and have to 

collect such WEEE separately.   

 

Trademarks 

The PLANET logo is a trademark of PLANET Technology. This documentation may refer to numerous 

hardware and software products by their trade names. In most, if not all cases, their respective 

companies claim these designations as trademarks or registered trademarks. 

 

Revision 

PLAENT IPX-1800N User’s Manual 

Revision: 1.0 (Nov. 2006) 

Part No. EM-IPX1800NV1.0

Summary of Contents for ISDN Internet Telephony PBX System IPX-1800N





































































Reviews:

No comments

Brands by name

Popular brands

Load more brands