manualshive.com logo in svg

Planet ISDN Internet Telephony PBX System IPX-1800N, User Manual

Share
Download
Planet ISDN Internet Telephony PBX System IPX-1800N User Manual Download Page 16

PLANET IP PBX user’s manual

 

 

 

 

 

 

 

 

Field 

Description 

Client 

Show the caller or callee’s extension number, port number, or SIP trunk 

ID. 

Connected 

In the conversation. 

Ring 

The client is a caller and is ringing a callee. 

Ringing 

The client is a callee and is ringed by a caller. 

State 

Reserved FXS 

detects 

off-hook. 

Dial 

The client is a caller. 

Answer 

The client is a callee. 

IVR 

Calls from FXO are picked up by Auto-Attendant. 

Meet-me 

The client enters meet-me. 

Service 

Voicemail 

The client enters voicemail. 

Party 

Shows extension number, POTS number or SIP trunk ID that is talking 

to this client. 

 

2.10 Firmware 

Upgrade 

The version of the running PBX firmware could be found in 

System

 -> 

Firmware Upgrade

. To 

upgrade current firmware, click 

Browse

 to locate a release file obtained from the vendor, and click 

UPGRADE

 to have the latest version of PBX firmware. 

 

Note:

 Do not change the firmware file name, otherwise the system will reject it. 

 

 

 

 

Summary of Contents for ISDN Internet Telephony PBX System IPX-1800N





































































Reviews:

No comments

Brands by name

Popular brands

Load more brands