PLANET IP PBX user’s manual
Add a User Group
1.
Enter a usergroup name beside the
ADD
button, and then
click
ADD
.
2.
The name will show in
Group ID
.
3.
Click the name in
Group ID
to view the edit page.
4.
Enter settings shown in
Table 4.2
.
5. Click
SET
to save the settings, and click
BACK
to return to
the USERGROUP MANAGEMENT page.
Now, you can see the newly added usergroup displayed in the
Group ID
.
Edit a User Group
1.
Click a usergroup name in the
Group ID
.
2.
Edit settings shown in
Table 4.2
.
3. Click
SET
.
Delete a User Group
1. Select
a
Group ID
.
2. Click
DEL
to remove the usergroup from the
Group ID
.
Table 4.2 Usergroup Configuration Settings
Field
Description
Group ID
A unique group name containing alphabets, numbers, and
underscore only without spaces; 32 characters maximum.
Description
Arbitrary description information.
Associated Trunks
Select outbound SIP trunks and PSTN trunks accessible by
this usergroup. Note the order matters the hunting
sequence in run-time.
Group ID
: The default number is “0”. A trunk with Group ID
“0” does not form a balance group with any other trunks in
Group 0. If Group ID is 1~9, trunks with the same Group ID
form a usage balance group.
Weight
: the weight of a trunk to be selected in a trunk
balance group for an outgoing call.
)
Trunks with the same group ID must be put together, or
the function will not work.
)
If there is not any appropriate SIP trunk and PSTN trunks
to select, come back later to revise selection once
trunks have been created.
