Manager”. By default, it is disabled.
Refresh status every xx
seconds. (5~300)
Setup the refresh interval for device status update. By default,
it is disabled.
Auto release when idle time is
over xx seconds. (5-300)
To avoid users occupy the MFP overtime; users can setup idle
timeout. It is used to disconnect the current connection after
the MFP is idle for a specified period of time. By default, it is
never timeout.
When you are clicking on the “MFP” in the “MFP Server List”,
you will see the information including “Status”, “Computer
Name” and “Contact Information”.
Your Contract Information
Enter your contact information here. When you connect to the
MFP, your contact information will be displayed in the right
side of the program for other users to contact you.
5.5.2
Installed MFP List
The MFPs that have been installed will be displayed in the list. If you have removed the MFP
from your computer, please delete the MFP from the list. The “MFP Server Control Manger”
will guide you to install the MFP when you want to install the same MFP next time.
23
