Planet FPS-1010MG User Manual Download Page 61

Page: 61 / 95

8. LPR

Printing

LPR Printing (Line Printer Remote technology) allows users to connect to MFPs or printers

via TCP/IP for printing sharing. The computer with Windows 98SE/Me/NT/2000/XP/2003

operating system can use the protocol to share printing in the network. MFP Server can

support LPR printing by default.

If you install the MFP Server in Windows 98SE/Me/NT, the MFP Server provides a tool

“Network Port Setup” that help to add the LPR protocol to users’ computer easily. Please refer

to Chapter 10.

To configure the LPR setting in Windows 2000/XP/2003, please follow the steps below.

1. Click “Start”, choose “Settings” and select “Printers and Faxes”.

2. Click “Add a Printer”.

3. The “Add Printer Wizard” is displayed. Click “Next”.

4. Select “Local Printer attached to this computer” and click “Next”.

Summary of Contents for FPS-1010MG
































































































Search results

Summary of Contents for FPS-1010MG

Reviews:

Related manuals for FPS-1010MG

Brands by name

Popular brands

Planet FPS-1010MG, User Manual

Search results

Summary of Contents for FPS-1010MG

Reviews:

Related manuals for FPS-1010MG

Brands by name

Popular brands