Planet FPS-1010MG User Manual Download Page 72

Page: 72 / 95

10. MFP Server Installation in Windows 98SE/Me/NT

This MFP Server supports TCP/IP network protocol and IPP and LPR printing protocols, it can

be a print server when you operate it in Windows 98SE/Me/NT/2000/XP/2003, Unix/Linux and

MAC OS. The IPP printing protocol can be used in Windows 2000/XP/2003. The LPR printing

protocol can be used in Windows 98SE/Me/NT/2000/XP/2003, Unix/Linux and MAC OS. For

the LPR and IPP settings in Windows 2000/XP/2003, please refer to Chapter 8 and 9.

This chapter will introduce you how to install the MFP Server to be print server in Windows

98SE/Me/NT.

Before you start, you should have:

One computer with Windows 98SE/Me/NT

The TCP/IP network protocol has been installed in the PC

10.1 Software

Installation

Procedure

The following are the installation steps in Windows 98SE. To install MFP Server in Windows

Me/NT, the procedures are similar.

1. Insert User’s Manual and utility CD into the CD-ROM drive to initiate the autorun program.

Once completed a menu screen will appear.

2. Click on “MFP Server Utility” hyper link to initiate the installation. Or you can click the

“Start” button and choose “Run”. (Suppose “E” is your CD-ROM drive). When the dialog
box appears, enter “E:\Utility\Setup.exe” and press enter key. You will see the dialog box
as below. Please click “Next” to continue.

3. The message is prompted to remind you that the MFP Server will only support print

sharing function since the operation system of your computer is Windows 98SE/Me/NT.
Click “Ok”.

4. The “MFP Server Utilities - InstallShield Wizard ” will be displayed. Click “Next”.

Summary of Contents for FPS-1010MG
































































































Search results

Summary of Contents for FPS-1010MG

Reviews:

Related manuals for FPS-1010MG

Brands by name

Popular brands

Planet FPS-1010MG, User Manual

Search results

Summary of Contents for FPS-1010MG

Reviews:

Related manuals for FPS-1010MG

Brands by name

Popular brands