Planet FPS-1010MG User Manual Download Page 27

Page: 27 / 95

5.4 Quick

Setup

Right click on the MFP Server icon in the system tray you can see the MFP servers you have

designated to “My Favorite List”. You can directly connect or disconnect the MFP and check

the MFP information from the here easily.

Quick Setup

Status

The current status of the MFP will be displayed here. “Connected”

indicates that you are connecting to the MFP. “Busy” indicates the

MFP is being used. “Idle” indicates that the MFP is free to use by

any users.

Connect

If the MFP is free to use, the “Connect” will be available to click for

occupying the MFP. Or it will be grayed.

Disconnect Disconnect the selected MFP. The “Disconnect” will be available

only for the user who is using this MFP.

Information

To check more information about the MFP Server and the MFP,

please click this button. The information will be listed as the

illustration below.

Summary of Contents for FPS-1010MG
































































































Search results

Summary of Contents for FPS-1010MG

Reviews:

Related manuals for FPS-1010MG

Brands by name

Popular brands

Planet FPS-1010MG, User Manual

Search results

Summary of Contents for FPS-1010MG

Reviews:

Related manuals for FPS-1010MG

Brands by name

Popular brands