Gigabit Content Security Router User’s Manual
Item
Description
Static IP:
There are two ways to input static IP:
1. If users want to set up a MAC address to acquire IP from DHCP, but the IP
need not be a specific assigned IP, input 0.0.0.0 in the boxes. The boxes
cannot be left empty.
2. If users want DHCP to assign a static IP for a PC every single time, users
should input the IP address users want to assign to this computer in the boxes.
The server or PC which is to be bound will then acquire a static virtual IP
whenever it restarts.
MAC Address:
Input the static real MAC (the address on the network card) for the server or PC
which is to be bound.
Name:
For distinguishing clients, input the name or address of the client that is to be
bound. The maximum acceptable characters are 12.
Enabled:
Activate this configuration.
Add to list:
Add the configuration or modification to the list.
Delete selected item:
Remove the selected binding from the list.
Add:
Add new binding.
Block MAC address on the list with wrong IP address: When this option is activated, MAC addresses which
are not included in the list will not be able to connect with the Internet.
Show New IP user:
This function can reduce administrator’s effort on checking MAC addresses one by one for the binding.
Furthermore, it is easy to make mistakes to fill out MAC addresses on the list manually. By checking this list,
administrator can see all MAC addresses which have traffic and are not bound yet. Also, if administrators find
that one specific bound MAC address is shown on the list, it means that the user changes the private IP
address.
Item
Description
Name
Input the name or address of the client that is to be bound. The maximum
acceptable characters are 12.
Enabled
Choose the item to be bound.
Apply
Activate the configuration.
Select All
Choose all items on the list for binding.
Refresh
Refresh the list.
Close
Close the list.
- 70 -
