Planet CS-5800 User Manual Download Page 28

Page: 28 / 142

Gigabit Content Security Router User’s Manual

- 22 -

6.1.3.1 IPv4 Only

This is configuration information for CS-5800 current LAN IP address. The default configuration is

192.168.1.1 and the default Subnet Mask is 255.255.255.0. It can be changed according to the actual network

structure.

Multiple-Subnet Setting

：

(IPv4 Only)

Click “Unified IP Management” to enter the configuration page, as shown in the following figure. Input the

respective IP addresses and subnet masks.

This is configuration information for the device current LAN IP address. The default configuration is

192.168.1.1 and the default Subnet Mask is 255.255.255.0. It can be changed according to the actual network

structure.

Summary of Contents for CS-5800















































































































































Search results

Summary of Contents for CS-5800

Reviews:

Related manuals for CS-5800

Brands by name

Popular brands

Planet CS-5800, User Manual

Search results

Summary of Contents for CS-5800

Reviews:

Related manuals for CS-5800

Brands by name

Popular brands