Gigabit Content Security Router User’s Manual
Chapter 4: Login Security router
This chapter is mainly introducing Web-based UI after connecting Security router.
First, check up Security router IP address by connecting to DOS through the LAN PC under Security router.
Go to Start
→
Run, enter cmd to commend DOS, and enter ipconfig for getting Default Gateway address, as
the graphic below, 192.168.1.1. Make sure Default Gateway is also the default IP address of Content Security
Router.
"
Attention
When not getting IP address and default gateway by using “ipconfig”, or the received IP
address is 0.0.0.0 and 169.X.X.X, we recommend that users should check if there is any
problem with the circuits or the computer network card is connected nicely.
Then, open webpage browser, IE for example, and key in 192.168.1.1 in the website column. The login
window will appear as below:
- 12 -
