Planet CS-5800 User Manual Download Page 66

Page: 66 / 142

Gigabit Content Security Router User’s Manual

administrators.

VLAN

This feature allows administrators to set the LAN port to be one or more

disconnected network sessions. All of them will be able to log on to the Internet

through the device.

Members in the same network session (within the same VLAN) can see and

communicate with each other. Members in different VLAN will not know the

existence of other members.

VLAN All

Set VLAN All port to be the public area of VLAN so that it can be connected to

other VLAN networks. A server should be constructed for the intranet so that all

VLAN group can visit this server. Set one of the network ports as VLAN All.

Connect the server to VLAN All so that computers of different VLAN groups can

be connected to this server. Moreover, the port where the administrator locates

must be set as VLAN All so that it can be connected to the entire network to

facilitate network management.

Mirror Port :

Users can configure LAN 1 as mirror port by choosing “Enable Port 1 as Mirror Port”. All the

traffic from LAN to WAN will be copied to mirror port. Administrator can control or filter the traffic through

mirror port. Once this function is enabled, LAN 1 will be shown as Mirror Port in Physical Port Status, Home

page.

- 60 -

Summary of Contents for CS-5800















































































































































Search results

Summary of Contents for CS-5800

Reviews:

Related manuals for CS-5800

Brands by name

Popular brands

Planet CS-5800, User Manual

Search results

Summary of Contents for CS-5800

Reviews:

Related manuals for CS-5800

Brands by name

Popular brands