Gigabit Content Security Router User’s Manual
be restricted to a specific WAN. If only specific Service Ports need to be
designated, while a specific IP destination assignment is not required, input “0”
into the IP boxes.
Interface
Select the WAN for which users want to set up the binding rule.
Enable
To activate the rule.
Add To List
To add this rule to the list.
Delete selected
application
To remove the rules selected from the Service List.
Moving Up & Down
The priority for rule execution depends on the rule order in the list. A rule
located at the top will be executed prior to those located below it. Users can
arrange the order according to their priorities.
"
Note
The rules configured in Protocol Binding will be executed by the device according to their priorities
too. The higher up on the list, the higher the priority of execution.
- 52 -
